List of Components
No.
|
Component
|
Quantity
|
Preset
|
||
1
|
10k
|
1 pcs
|
Capacitor
|
||
2
|
100nF
(ceramic)
|
3 pcs
|
Diode
|
||
3
|
4148
|
2 pcs
|
4
|
IN
5818
|
1 pcs
|
IC
|
||
5
|
NE555
|
1 pcs
|
6
|
IC
base (8 pin)
|
1 pcs
|
Inductor
|
||
7
|
Toroid
|
1 pcs
|
Mosfet
|
||
8
|
IRFZ44N
|
1 pcs
|
PCB design by using Design Spark Software
3D top preview
1) Print the PCB layout on the gloss paper / photo paper by using laser jet printer.Place the photo paper face down on the copper clad board.Use a hot clothes iron to transfer the track pattern from the paper to the copper board.
2) Put the board in the acid solution (Ferric Chloride) and agitate until the unwanted copper traces are completely etched.
3) Rinse the board with a tap water and dry it. Dissolve the printed toner with paint thinner.
4) Drill holes (holes should be at least 0.1 mm bigger than pins / wires)
5) Put the component at proper place and solder it.
Hi. Do you have a schematic diagram of the circuit instead of the practical step by step on how to do the circuit? Do get back to me asap
ReplyDeletesir; plz give me the MPPT circuit diagram and details
ReplyDeleteI Think this is an unsuccessful Project
ReplyDelete